|
|
Post by heruk on Oct 19, 2014 18:14:11 GMT -6
o can you point me to a vid that will tell me how to put the bottom chain guide back in? Its dark as hell in my back yard right now
|
|
|
|
Post by heruk on Oct 19, 2014 18:13:12 GMT -6
Thanks Alley man <3 you should consider taking the poop out of your name bro you are the man!  |
|
|
|
Post by heruk on Oct 19, 2014 18:11:20 GMT -6
That was the intake side and just like the piston's center it is clean and easy to wipe off but the rest of it is crusted up.
|
|
|
|
Post by heruk on Oct 19, 2014 17:52:05 GMT -6
Looking at the piston looks like it was leaking on one side there notice the black crust only on one edge of the piston and not around the other parts of the piston. What is that clear spot on the piston in the center?? Which side is that the exhaust side? You may have not torqued the bolts up good enough on that side. Here you can see where it was leaking better on the head, I thought I heard vacuum leaking.  ok so tighten that side more is what you are saying? is that the solution for leaking? Ill have to go outside and take another vid to tell you what side is the exhaust side when i changed the cylinder head last time the piston was completely black on top. I was burning way too much oil at that time and wsnt changing the oil often enough which at that time was every two weeks. Now that the head has been changed i assume it is clear there because a new head was put on with a new plug. I am no expert of course. Ill try and make a new clearer video for you |
|
|
|
Post by heruk on Oct 19, 2014 17:02:38 GMT -6
|
|
|
|
Post by heruk on Oct 19, 2014 14:25:22 GMT -6
well when i put my finger on the whole it pushed it off and when i put the plug against the headcover it sparked, you saw that in the video
|
|
|
|
Post by heruk on Oct 19, 2014 13:15:44 GMT -6
ok so ill check and tighten the head but is there an image or a video that will show me what a bad piston or valve loos like?
|
|
|
|
Post by heruk on Oct 19, 2014 11:08:22 GMT -6
yea i changed the gas Im just wondering weather or not the carb has anything to do with it
|
|
|
|
Post by heruk on Oct 19, 2014 10:30:43 GMT -6
what is someone put water in my tank. what will that do?
|
|
|
|
Post by heruk on Oct 19, 2014 10:29:43 GMT -6
ok so how do i determine if the valve is bad or if there is a whole in the piston? should I rule out the carburetor?
|
|
|
|
Post by heruk on Oct 19, 2014 10:28:27 GMT -6
I jumped it with cables too and it didnt start
|
|
|
|
Post by heruk on Oct 19, 2014 10:20:13 GMT -6
no the hole is not stripped. i took extra care for it not to strip since i did that to another head before.
|
|
|
|
Post by heruk on Oct 18, 2014 8:47:13 GMT -6
still not starting...
|
|
|
|
Post by heruk on Oct 18, 2014 8:21:41 GMT -6
So if it is bad gas would draining the bad and replacing it with good be all that is required?
|
|
|
|
Post by heruk on Oct 18, 2014 0:15:02 GMT -6
K thanks Alley I'll do that in the morning
|
|
