|
|
Post by heruk on Oct 21, 2014 18:55:49 GMT -6
O ive sworn all the necessary swearing thanks. So some people have gotten away with 3 bolts? i thought that might not be possible since I was having compression issues. I think it is actually the cylinder head bolt hole that striped
|
|
|
|
Post by heruk on Oct 21, 2014 17:20:54 GMT -6
the bike started giving trouble again so i decided to adjust the valves. when i tightened the head cover i seem to have stripped the tread on one of the bolts.............
|
|
|
|
Post by heruk on Oct 21, 2014 11:30:50 GMT -6
are these the right size? link |
|
|
|
Post by heruk on Oct 21, 2014 10:56:32 GMT -6
bike is running good now Id like to thank you all  Ill take a video in a few. after adjusting the fuel/air ratio screw, running it a couple of times for 10 min then not being able get it to start, I adjusted the valves since it made sense that heat and pressure would push the head up. This bike really is an educational adventure!  Should I plug the mixture screw back up? |
|
|
|
Post by heruk on Oct 20, 2014 23:01:41 GMT -6
the four bolts holding the rocker arm assembly yes
ah yes the old fuel ratio mixture screw. i would have to get a dremel tool to deal with that... correct? I believe mine is sealed.
This one?
|
|
|
|
Post by heruk on Oct 20, 2014 18:19:40 GMT -6
I think i may have to tighten the rocker arms down a little more.
|
|
|
|
Post by heruk on Oct 20, 2014 18:18:13 GMT -6
ill have to wait until morning, the sound of the starter is going off every second is a bit disturbing at this hour.
it was idling over 3000 when warm
|
|
|
|
Post by heruk on Oct 20, 2014 17:51:27 GMT -6
so i tightened the nuts on the rocker arms, adjusted the carb and got it to start. I did it without a torque wrench because I saw a chick at the mall and forgot to buy one... i then rode it around to warm it up before adjusting the idle to 1700rpms. I parked the bike, adjusted the idle to 1700 and then shut it off. It started right up 3 times and now no matter how i adjust the rpms it wont start. What do you think?
Its gaped and wet
new premium gas
|
|
|
|
Post by heruk on Oct 20, 2014 15:57:36 GMT -6
C7hsa
|
|
|
|
Post by heruk on Oct 20, 2014 11:46:32 GMT -6
Im going to try and tighten the rocker arm things again
|
|
|
|
Post by heruk on Oct 20, 2014 11:46:11 GMT -6
That's the frame brother
|
|
|
|
Post by heruk on Oct 20, 2014 10:30:38 GMT -6
|
|
|
|
Post by heruk on Oct 20, 2014 8:12:08 GMT -6
ill take another video in a sec
but it has spark and compression and i shot fuel in the intake hose for this video
|
|
|
|
Post by heruk on Oct 19, 2014 21:08:19 GMT -6
no success
I will put up a video when i get a chance to jump start it
|
|
|
|
Post by heruk on Oct 19, 2014 18:29:18 GMT -6
haahahaha ooo ok I get it. Yea I slept through french class...
|
|
