Certified Clinician
Currently Offline
Posts: 64 
Likes: 3
Joined: Aug 31, 2014 23:10:45 GMT -6
|
Post by drahken on Oct 23, 2014 17:01:50 GMT -6
make sure to fully install the exhuast, sit it up on the bike and tighten your mounting bolts and all that, do the flange bolts last. and make sure your exhaust studs and nuts arent bent.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Oct 24, 2014 11:18:46 GMT -6
I was just proofreading this post's title and it says, "How would I "made" ,muffler gasket.... Btw heres a video, link to the video |
|
|
|
Post by Bashan on Oct 24, 2014 20:37:37 GMT -6
There, now it doesn't say that.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Nov 2, 2014 15:45:31 GMT -6
Heres a video with my muffler off and all the bolts are tight on the flange 1drv.ms/10dli12 |
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Nov 2, 2014 16:40:20 GMT -6
Do you think this looks like I need a new muffler.. ?
|
|
Doc's Anything Goes
Currently Offline
Posts: 1,226
Likes: 81
Joined: Apr 4, 2014 3:52:42 GMT -6
|
Post by richardv on Nov 2, 2014 18:37:17 GMT -6
It does sound like it.
|
|
Clinician
Currently Offline
Posts: 29
Likes: 2
Joined: Sept 24, 2014 7:04:39 GMT -6
|
Post by katastruff on Nov 3, 2014 6:53:00 GMT -6
You can get a brand new muffler just like that for about $40 on ebay.
If you can weld, you could open it up and fix it. Drill out the rivets, remove the aluminum sleeve, cut it open and remove the rattling part from it. Weld it back and VOILA!!!
|
|
|
|
Post by cyborg on Nov 3, 2014 8:11:07 GMT -6
Ebay it is,,,,,
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Nov 3, 2014 9:10:43 GMT -6
Anyone link me to the 40$ muffler? LOL If I call the dealer I bet they want like 80$ and 30$ for shipping, SSR.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Nov 3, 2014 9:13:30 GMT -6
Thank you guys for all your help too. I'm going to pick up a strap wrench soon for the magneto to replace the stator the plastic prong plug thing is green instead of white but still has three wires going into it.
|
|
Clinician
Currently Offline
Posts: 29
Likes: 2
Joined: Sept 24, 2014 7:04:39 GMT -6
|
Post by katastruff on Nov 3, 2014 9:21:23 GMT -6
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Nov 3, 2014 16:41:13 GMT -6
If it was me I would take it apart and repair it. For just a few more bucks you could get a harbor freight wire welder, (muffler + shipping).
Actually less than a bucks worth of sheet metal screws would do the deed. A new muffler is going to be just like you have except newer and shiney, and subject to the same comming apart.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Nov 3, 2014 18:26:59 GMT -6
|
|
