wired By daddyof7 (Read 2,080 times)

[daddyof7]

Wet

Here is cdi box supposedly it's a high performance. Not sure if it's even good or not

[daddyof7]

Thanks for telling me this is a weird motor at least im not crazy or stupid.  Is it 4 stroke? 

[daddyof7]

Also yes my pick up coil is two wires. Which is why I was a little confused everything I was looking at was single wire

[Alleyoop]

Yes it is a Four Stroke.
Now I have to ask on that CDI you just took a picture of.

Where is the POWER WIRE on the 2 plug side, there should be a wire on the BOTTOM on the 2 plug which powers the CDI.

Did you connect those 4 wires on the 4 plug?

[Alleyoop]

Where is the CDI POWER WIRE? No power to the CDI NO SPARK.

[Alleyoop]

You mentioned you have a wiring diagram, can you put the picture of it up.
Alleyoop

[daddyof7]

I see what your talking about. That's a black wire with I thought was to kill switch and I disconnected it to eliminate the kill switch itself. Is that wire supposed to have 12 volts from battery with key on ?

[Alleyoop]

Sept 20, 2015 19:49:37 GMT -6 daddyof7 said:

I see what your talking about. That's a black wire with I thought was to kill switch and I disconnected it to eliminate the kill switch itself. Is that wire supposed to have 12 volts from battery with key on ?

If your system is DC yes it should have 12Volts with key on.
Alleyoop

[daddyof7]

This is only diagram that was half way accurate only difference is pick up coil has two wires. How do I know if im dealing with ac or dc volts?

[daddyof7]

Never mind I just saw it

[Alleyoop]

Plug the black wire in the BOTTOM of the two plug and see if you have spark and or it fires.

[Alleyoop]

QUESTION:
1. Does the black wire have 12volts with the key on?
2. Do you have spark with it plugged into the bottom on the TWO PLUG?

If not TRY and pull the RED/WHITE wire from the BOTTOM LEFT on the 4 PLUG, that is a ground slot and maybe it is grounding out the CDI.

[daddyof7]

Yes black wire has 12 volts. I disconnected the red / white wire ( it was a ground) but still no spark

[daddyof7]

Yes black wire has 12 volts. I disconnected the red / white wire ( it was a ground) but still no spark

[daddyof7]

The power to the coil wire stayed grounded along with the trigger feed wire. Wish you live close to me I'd bring it by you.