Custom 2010 GMW V-150 Build | Scooter Doc Forum

Clinician

Currently Offline

Posts: 23
Likes: 0
Joined: Jan 27, 2011 10:34:45 GMT -6

Custom 2010 GMW V-150 Build by: audionut74 - Jan 29, 2011 14:46:25 GMT -6

Reply Quote

Post by audionut74 on Jan 29, 2011 14:46:25 GMT -6

Just picked up this 2010 GMW V-150 150cc scooter....

gorillamotorworks.com/

The R1 is not on there site yet

this is how it Started when I brought it home

now the New look after a lot of time, custom painting, new parts and $$
I will post a list of parts soon to anyone intrusted?

I think it came out sweet

its pretty quick now also

I also installed a trick new Dr.pulley H.I.T clutch and vairator and gates belt

Parts List
Most aftermarket parts are from (Monstergy6.com) steven has been a big help on this project!

All bulbs have been changed to led
DDM 35w HID's (5k) have been installed.. Awesome light output ;D

All cheep arse wiring connectors have been replaced with new ends and heatshrinked
All smog or air systems have also been removed

Velocita Performance 30mm Carburetor(125main jet)
NCY Intake Manifold Teflon Coated
Velocita Performance Coil
Velocita No Rev CDI (DC)
NGK Spark Plug Iridium
Velocita Performance GY6 Stainless Steel Pipe with a special hitemp coating
Conti Zippy 1 Performance Scooter Tire
NCY Brake Rotor 180mm
NCY Racing Pads and shoes
Velocita Air Scoop
Dr.Pulley Varitator
Dr.Pulley H.I.T Clutch
Gates Kevlar Belt

Any ?'s regarding Paint work (Simulated Carbon Fiber) or coatings I have had done don't hesitate to pm me and I will get you in contact with my painter or coater

My next mission with this scooter is to chop the rear mud guard and reupholster the seat with black Swede and add red stitching

Last Edit: Feb 9, 2012 14:49:30 GMT -6 by audionut74

2010 GMW V-150
2011 Ktm 990 SMR

Cruiser PM Cruiser Cruiser's Posts Cruiser's Threads Scooter Doc Currently Offline Jonway YY250T Posts: 1,281 Likes: 3 Joined: Mar 31, 2010 20:39:10 GMT -6	Custom 2010 GMW V-150 Build by: Cruiser - Jan 29, 2011 15:22:34 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Cruiser on Jan 29, 2011 15:22:34 GMT -6 Welcome to Scooter Doc, audionut74. That is a sweet looking scoot. We'll be looking forward to more input on your mods and updates.
	2008 Peace VIP 50 2008 Jonway YY250T aka Zscooter

Senior Clinician

Currently Offline

Posts: 107
Likes: 0
Joined: Jan 3, 2011 10:10:57 GMT -6

Custom 2010 GMW V-150 Build by: Hammerspur - Jan 29, 2011 16:34:22 GMT -6

Reply Quote

Post by Hammerspur on Jan 29, 2011 16:34:22 GMT -6

Nice work!
Looks just as good here as it did at the Dawg Pound!

Still interested in the Dr. Pulley driveline...
Did you ride it stock before the conversion?
They say their stuff provides noticeable improvement across the board.

If you get a chance some details re: off-line response, at speed acceleration, RPMS, etc would be awesome.

Steve

'07 E-Ton Beamer R4 150cc
'00 Kawasaki VN1500E3
'96 Honda VFR750

Bashan PM Bashan Bashan's Posts Bashan's Threads Forum Admin Currently Offline In Memory Rich Carman 1953 to 2015 RIP ScooterDoc Posts: 9,389 Likes: 300 Joined: Mar 29, 2010 18:33:42 GMT -6	Custom 2010 GMW V-150 Build by: Bashan - Jan 30, 2011 3:44:59 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Bashan on Jan 30, 2011 3:44:59 GMT -6 I have just a few things to comment on: Love the canister muffler Love the black and red theme Love the front cowling Love the disc rotor I hate you Not really, that's a beautiful scoot. Congrats: Rich

madcollie PM madcollie madcollie's Posts madcollie's Threads Guest Currently Offline	Custom 2010 GMW V-150 Build by: madcollie - Jan 30, 2011 6:51:52 GMT -6 Reply Quote Select Post Deselect Post Link to Post Back to Top Post by madcollie on Jan 30, 2011 6:51:52 GMT -6 [glow=red,2,300]VERY NICE!!![/glow] Please sir, may we have some more?

workdog95 PM workdog95 workdog95's Posts workdog95's Threads Senior Clinician Currently Offline Past Donor - Renew Posts: 139 Likes: 0 Joined: Sept 24, 2010 18:30:20 GMT -6	Custom 2010 GMW V-150 Build by: workdog95 - Jan 30, 2011 17:52:24 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by workdog95 on Jan 30, 2011 17:52:24 GMT -6 Looks great!!!

Clinician

Currently Offline

Posts: 23
Likes: 0
Joined: Jan 27, 2011 10:34:45 GMT -6

Custom 2010 GMW V-150 Build by: audionut74 - Jan 30, 2011 20:17:40 GMT -6

Reply Quote

Post by audionut74 on Jan 30, 2011 20:17:40 GMT -6

Thanks for all the great feed back guys...I have some more picks coming soon just need time to down load them.

I will be posting a how too on modifying the front shocks (for under $15 )so that they actually will preform like a oil filled fork shock should and not some vague uncontrolled spring that bottoms out on the smallest bumps.

2010 GMW V-150
2011 Ktm 990 SMR

Hammerspur PM Hammerspur Hammerspur's Posts Hammerspur's Threads Senior Clinician Currently Offline Posts: 107 Likes: 0 Joined: Jan 3, 2011 10:10:57 GMT -6	Custom 2010 GMW V-150 Build by: Hammerspur - Jan 31, 2011 10:08:07 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Hammerspur on Jan 31, 2011 10:08:07 GMT -6 Anxious to get more on the forks too!
	'07 E-Ton Beamer R4 150cc '00 Kawasaki VN1500E3 '96 Honda VFR750

Clinician

Currently Offline

Posts: 23
Likes: 0
Joined: Jan 27, 2011 10:34:45 GMT -6

Custom 2010 GMW V-150 Build by: audionut74 - Feb 1, 2011 11:27:34 GMT -6

Reply Quote

Post by audionut74 on Feb 1, 2011 11:27:34 GMT -6

I have an update on the never ending project 8-)

I installed a few more goodies on the scoot...

*178cc AL cylinder kit with heat dispersion coating
*NCY hi flow head with heat dispersion coating on the outside and in the intake and exhaust ports along with the piston dome and cylinder head

*A9 cam with titanium valve springs
*All but a few special bolts have been replaced with stainless steel bolts

I have retained the 24mm carb on this engine primarily to the fitment issues have had with the 3 different types of 30mm carbs with 4 types of intakes,spacers,adapters,etc. the engine mount on this bike is just a little different than most. and I really don't want to take the time to "reinvent to wheel" on this project.

now with that said I took the advice from a few members on and off this forum to just don't worry about it and just run the stock carb so after a few hours of figuring out the right jets,variator weight and clutch spring set up I have to say I don't miss not going to a bigger carb AT ALL! this thing runs great and has way more power especially low to mid range. it pulls strong to 50 and then tapers off to top speed of (64mph GPS) not bad for some one my size..can't wait to break it in to see how good it will go then ;D

I would like to really thank Steven (MONSTERGY6) for his help. He did a great job building the motor and helping me get all the pieces together for this build.

Last Edit: Feb 9, 2012 14:51:07 GMT -6 by audionut74

2010 GMW V-150
2011 Ktm 990 SMR

audionut74 PM audionut74 audionut74's Posts audionut74's Threads Clinician Currently Offline Posts: 23 Likes: 0 Joined: Jan 27, 2011 10:34:45 GMT -6	Custom 2010 GMW V-150 Build by: audionut74 - Feb 2, 2011 23:40:02 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by audionut74 on Feb 2, 2011 23:40:02 GMT -6 Jan 31, 2011 10:08:07 GMT -6 Hammerspur said: Anxious to get more on the forks too! here you go scooterdoc.proboards.com/index.cgi?action=display&board=techtips&thread=2845
	2010 GMW V-150 2011 Ktm 990 SMR

audionut74 PM audionut74 audionut74's Posts audionut74's Threads Clinician Currently Offline Posts: 23 Likes: 0 Joined: Jan 27, 2011 10:34:45 GMT -6	Custom 2010 GMW V-150 Build by: audionut74 - Feb 9, 2012 14:51:39 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by audionut74 on Feb 9, 2012 14:51:39 GMT -6 Updated Photos
	2010 GMW V-150 2011 Ktm 990 SMR

bcgreatness PM bcgreatness bcgreatness's Posts bcgreatness's Threads Scooter Doc Currently Offline 2008 Roketa MC-74-150cc & 82' Honda CM 250 Custom Posts: 491 Likes: 1 Joined: Nov 26, 2011 21:17:27 GMT -6	Custom 2010 GMW V-150 Build by: bcgreatness - Feb 9, 2012 15:50:04 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by bcgreatness on Feb 9, 2012 15:50:04 GMT -6 What!?!?!? That's sick!

Senior Clinician

Currently Offline

2008 Zhenjiang Summit Hauw HY150T-5

Posts: 144
Likes: 0
Joined: Aug 31, 2011 12:02:04 GMT -6

Custom 2010 GMW V-150 Build by: silverfox96 - Feb 10, 2012 11:43:44 GMT -6

Reply Quote

Post by silverfox96 on Feb 10, 2012 11:43:44 GMT -6

One thing I've never understood about these chinese scoots! Why in the world would they manufacture a wheel with one side finished and the other looking like crap!

Oh yes! Great lookin Scoot!

2008 Zhenjiang Summit Hauw HY150T-5,

Clinician

Currently Offline

Posts: 23
Likes: 0
Joined: Jan 27, 2011 10:34:45 GMT -6

Custom 2010 GMW V-150 Build by: audionut74 - Feb 11, 2012 13:50:35 GMT -6

Reply Quote

Post by audionut74 on Feb 11, 2012 13:50:35 GMT -6

Feb 10, 2012 11:43:44 GMT -6 silverfox96 said:

One thing I've never understood about these chinese scoots! Why in the world would they manufacture a wheel with one side finished and the other looking like crap!

Oh yes! Great lookin Scoot!

very true! there is pretty much no choices that I have found for custom wheels for this size and type scoot

.

2010 GMW V-150
2011 Ktm 990 SMR

bcgreatness PM bcgreatness bcgreatness's Posts bcgreatness's Threads Scooter Doc Currently Offline 2008 Roketa MC-74-150cc & 82' Honda CM 250 Custom Posts: 491 Likes: 1 Joined: Nov 26, 2011 21:17:27 GMT -6	Custom 2010 GMW V-150 Build by: bcgreatness - Feb 23, 2012 17:09:02 GMT -6 Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by bcgreatness on Feb 23, 2012 17:09:02 GMT -6 what kit did you go with for your HIDs?