Finished Mods... By bhinch (Read 2,264 times)

[bhinch]

Just completed some mods...manual choke....HID install...H4...Bi-Xenon...Hi/Lo...5000k temp..super slim ballast....new grips.....life is good.....great mods.....and the new grips make the scooter seem like a new model....enjoy...

[damin69]

Common don't just tease us. Lets see some pictures of the finished MODS... :-)

[bhinch]

ecover/DSCN1788.jpg[/IMG] Mods and seat recover...maybe it will post...thanks..

[damin69]

Love the new grips them look great.

[jackryan]

I love those grips, where did you get them?

[bhinch]

Thanks .... Ebay....they came from Hong Kong.....$9.69 a set....free freight....7/8" handlebars...a left and a right....larger size for the throttle....just search on Ebay for motorcycle grips....enjoy....ps: takes almost two weeks to get them....slow boat...

[dugglebogey]

Love the grips, I searched ebay and ordered some similar ones, but they were from a US shipper so hopefully they won't take as long as 2 weeks.

Great pics btw.

[bhinch]

Thanks....I was happy with the free shipping...so the wait was ok....enjoy the ride....

[jalat]

I also installed Bi-xenons to my scooter yesterday. They are great! I need to align them a little bit because they are showing a little too much left. Not center. And a little too low.

I also hope that aligning can be done without removing any plastic. It might bee hard to align them if you have to remove plastic. Then try. Then remove and again try etc...

[bhinch]

Traveled to work this morning...around 2 AM and the HID's worked great.......I did notice some high heat feeling of the lens (plastic) maybe it will not distort the lens (melt) only time will tell...not much of a way to align the bulbs....you will have to remove the nose piece and trial and error...good luck....mine are so much better than stock...I can live with the alignment prob....enjoy the ride..

[bhinch]

Thanks for info on adjustment....will try the next time I have the nose off....going to ride .... and enjoy the high heat here in Texas....98 degrees.....and climbing....enjoy the ride...

[trailheadmike]

Really great job - those grips are fantastic.

[jalat]

Jun 6, 2011 14:52:47 GMT -6 bhinch said:

...not much of a way to align the bulbs....you will have to remove the nose piece and trial and error...good luck....mine are so much better than stock...I can live with the alignment prob....enjoy the ride..

I did the alignment with this kind of tool (don't know what it is in English)


The small one (3"-4" length) and screwdriver head-piece in that hole. Then you can use it with your hands without removing any plastic.

[bhinch]

cool....thanks...getting ready to go to work on the scoot....will see if I can find these tools....thanks again.....enjoy the ride....

[bhinch]

How did you get to the headlight adjusment without taking the plastic off.....removed the windshield and went in from the top...