Valve Adjustment Tool Set (Tappet Adjuster) By drjeff (Read 3,986 times)

[drjeff]

www.amazon.com/gp/product/B000JP31T8/ref=ox_sc_act_title_1?ie=UTF8&m=A3TGC5XRRCX4P2

$31.67 free shipping

Here are the feeler gauges

www.amazon.com/Lisle-68050-Valve-Feeler-Gauge/dp/B0009OR94M/ref=pd_sbs_auto_6

$3.60

[Bashan]

Wow, I mean wow. I didn't even know this kind of tool existed. That would make it SO much easier, especially on the exhaust. Thanks man, good find. Rich

[Alleyoop]

Yep, I ordered the tappet adjusters from JIM and it works really nice makes it a lot easier.

Now those Feeler gauges are nice but they do NOT HAVE .004" and .005" they start at .008"
and on our CY6s we use .004 and .005.
Alleyoop

[drjeff]

this seems to be the correct feeler gauge

www.amazon.com/Offset-Valve-Tappet-Gauge-Set/dp/B000JP4V6A/ref=sr_1_8?ie=UTF8&qid=1315415240&sr=8-8

[silverfox96]

Hey, Allyoop, I just set mine yesterday with metric guages and I set them at .10mm

[89newbie]

Ste mine yesterday. Bike was so quier found no lash gap at all and the bike was running terrible. Adjusted them to 19 &24 sounded like a thrashing machine. Adjusted them again using 4mm,still a thrashing machine.but bike runs great, starts right up but sounds like a thrashing machine. If I have to listen to the noise I would rather walk!!! Wondering if the Chinks have revised the settings and we all are in the dark. I have set valves for years from cars and trucks at an early age to airplanes at later age. VALVES ARE NOT SUPPOSED TO RATTLE!!! Thought now, maby im just to old, ain't no valves on a roching chair!!!

[mikecop]

I am not a mechanic who will attempt a valve adjustment on my Roketa 250 54B (Linhai engine). I am wondering how the adjustment tools on this link work, and wondering if the following tool would do the same thing.

www.amazon.com/Alltrade-648827-2-Inch-Valve-Adjustment/dp/B0002Q8TU0/ref=sr_1_1?s=automotive&ie=UTF8&qid=1329261828&sr=1-1

From looking at a couple of links about valve adjustment it appears that those who have the 244 Moto engine have a much easier valve adjustment than those of us who have the 257 Linhai engine.

[Alleyoop]

Yes it would if the lock nut is 10mm, on the GY6 they are 9mm nuts. Also it is 7 1/2 inch long so make sure you have enough clearance to manipulate it in the tight space.
Alleyoop

[mainepeace]

www.amazon.com/Motion-Pro-Tapper-Feeler-Gauge/dp/B000GTZNWA/ref=wl_mb_hu_m_2_dp

Perfect sizes. .004" and .005" on a single unit.

[rapidjim]

Yep They are great tools.

scooterdoc.proboards.com/index.cgi?board=specials&action=display&thread=4510

Jim

[mainepeace]

Do you have any more? I'm thinking about grabbing a set, and better to buy from you than from some anonymous person on the Internet.

Greg

[rapidjim]

I have 2 sets in stock.

Thanks Greg

Jim