tail light doesnt come on baja sc125??? By tulsaoutlaw (Read 2,761 times)

[tulsaoutlaw]

just bought a baja sc125 yesterday an the tail light will not come on.. yes the bulb is good and harness is hooked up what else could it be?

[kz1000st]

Dec 20, 2011 9:26:51 GMT -6 tulsaoutlaw said:

just bought a baja sc125 yesterday an the tail light will not come on.. yes the bulb is good and harness is hooked up what else could it be?

Did you check for volts in the socket? Other wise you'l have to follow the power feed and see where it's open. Do the brake lights work?

[jct842]

Some one should make a kit to service the gy6 that contains tools including a decent vom along with basic instructions on the use of a meter. any one who owns a gy6 should have a meter for sure. just because the wiring looks like it is place doesn't mean there is continuity. measure it! john

[kz1000st]

Dec 20, 2011 10:27:03 GMT -6 jct842 said:

Some one should make a kit to service the gy6 that contains tools including a decent vom along with basic instructions on the use of a meter. any one who owns a gy6 should have a meter for sure. just because the wiring looks like it is place doesn't mean there is continuity. measure it! john

I own two-digital and analog.

[jct842]

I have a 50 year old vtvm and probably 5-6 digital meters! plus a tectronics oscilloscope just in case I would want to look at a wave form coming off a stator or coil!

[tulsaoutlaw]

i will check the socket later this evening..even the brake lights are not working..but got this scooter for $100 with only 1.5 miles on it so far im winin!

[kz1000st]

It's probably a bogus connection upstream somewhere. As someone else who posts here discovered, Bajas weren't put together with the best plugs and assembly line care.

[jct842]

your bad connection should be pretty easy to ferret out. these scooters are built with old technology and are really pretty simple to work on. If they were built the same as a brand new honda or yamaha scooter most of us could not afford to own one and looking at signatures a lot of us own 3 and 4 of them. just take your time and go over it thoroughly. john

[sprocket]

What do you mean by the tail light? The light over the license plate or the brake lights...

What kind of socket is it? does it have one contact or two? Sometimes people use the wrong bulbs... single contact in a double contact socket...

[tulsaoutlaw]

yes the running red tail light and brake lights are not working at all this is the link for the manual any diagnosis of electrical part that would cause this would be a great help as i am fairly new to the scooter world www.fastrixx.com/baja/1.%20Price%20Lists,%20Parts%20Lists%20and%20Schematics/Baja/Scooters/SC125%20Zongshen%20Sun%20City%20125cc%20Scooter%20(VIN%20PREFIX%20LZST).pdf

[niedzwiedz]

Your manual is a parts list.
You need a wiring diagram.
Maybe someone have it.
On your Manual look at page 26 of 84 #5 Harness then page 28 of 84 #9 and #10.
This is where you need to focus your attention.

WE can not help you unless you help too.
You have to get a Multimeter to test for volts and broke wires!
You should be able to buy a meter for $15 or less. Try Harbor Freight first.

From your screen name I assume you in Tulsa? IF, I am correct, there is a Harbor Freight here;
TULSA OK #064
2160 S. SHERIDAN
TULSA, OK 74129
Phone: [phone]

See this;
www.harborfreight.com/catalogsearch/result?keyword=multimeter

If you can find a Harbor Freight you wanting the cheapest meter;
Item #90899
if they not have that try
Item #92020 OR
Item #98025.
They should have the First for maybe $4.99, they used to have them cheaper, I paid $2.99 for mine on sale.

IF, you can not find a Harbor Freight try Auto-Zone. I hope this work.
www.autozone.com/autozone/storelocator/storeLocatorMain.jsp?targetPage=storeLocatorResults&_requestid=827607
Maybe this;
Part # 3306N
www.autozone.com/autozone/accessories/Innova-Hands-Free-digital-multimeter/_/N-26lr?counter=11&filterByKeyWord=multimeter&fromString=search&itemIdentifier=64471_0_0_
OR
Part # CP7848 OR 85593 I paid $15 for this and it still shows it $15.
www.autozone.com/autozone/accessories/Actron-Analog-pocket-electrical-tester-measures-AC-DC-voltage-DC-current-Ohms-and-decibels-also-tests-1-5-and-9-Volts-batteries/_/N-26lr?counter=22&filterByKeyWord=multimeter&fromString=search&itemIdentifier=449322_0_0_

LOOK and know the Battery is in the meter you buy!

WHEN you have a meter (multimeter), come back and tell us. Then we may be able to help you use it!

[niedzwiedz]

2 Questions?

DO the rear Turn Signals work? The Left and Right turn lights?

Does the front Headlight work?

I will be using the Generic Wiring Diagram found here;
www.scooterdoc.proboards.com/index.cgi?board=wiringdiagrams&action=display&thread=5395

[Bashan]

Well I guess you figured out by now the guys are suggesting that you get a multimeter if you don't have one. And they are correct, you do need one if you're going to work on a scooter. The brake light and tail light run are two seperate circuits that end up at the tail/brake light bulb. Since neither is working most likely the connector running to the light is bad. You can see the connector on the diagram that our buddy Niedzwiedz posted. The part on the link you posted is the entire harness for the scooter. Coming off the back of that should be a short connector that looks something like this:

That's for a turn signal so it's not exactly the same, the one to the brake/tail light will have three wires. The brake light wire is almost always yellow/green and the ground is always green. The tail light wire is usually brown but I think Bajas can be a little hinky on that. Some Bajas have two bulbs in the rear lens and that may confuse things. You will need to remove the connector from the bike and test it for continuity with a multimeter. It's probably a bad ground since both lights aren't working. Test the green wire to the metal ring that fits on the base of the bulb for continuity to the end of the green wire. The tail light wire runs to the center of the connector and the brake light wire is off center, test them also. Here is a link to a turn signal troubleshooting tutorial PDF. About halfway through it I talk about multimeter testing and checking the rear lights. Read that through and see if it helps. Let us know if you're still having problems. Rich

[sprocket]

I love that link Rich...

[Alleyoop]

Make it easy on yourself, buy a cheap PROBE:
www.delcity.net/store/Battery-&-Voltage-Analyzer/p_10237.a_1

Hook the ground wire to a bolt or anything going to the frame or even the negative post on the battery if it is near. Then probe the Wires going to your Socket right before the socket. If it lights up you have juice which will tell you its bad connections in the socket, bad bulb, bad socket etc... If it doesn't light up then check by the handlebars to see where your looseing the juice.
Also did you try BOTH brakes?
Alleyoop