Senior Clinician
Currently Offline
2008 Zhenjiang Summit Hauw HY150T-5
Posts: 144
Likes: 0
Joined: Aug 31, 2011 12:02:04 GMT -6
|
Post by silverfox96 on Feb 13, 2012 10:46:14 GMT -6
I believe that I've located the cover that I want to install on my 150cc scoot, however I want to remove the kickstarter, which I've never had the occasion to use. Just think it'll lood better without that ugly kickstarter hanging out there! lol Besides it seem to just get in the way of putting the scoot on the centerstand. My question is: Does anyone make a chrome plug for the hole in the case, where the shaft protrudes? I'd appreciate any and all feed-back. Thanks everyone.
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 26, 2024 6:09:59 GMT -6
|
Post by Deleted on Feb 13, 2012 10:58:11 GMT -6
i belive that does not exist. all the chrome CVT covers i have come with the hole and i have never seen an actual plug for it.
|
|
Doc's Anything Goes
Currently Offline
Say no to scooter abuse
Posts: 3,873
Likes: 156
Joined: Mar 31, 2010 19:07:16 GMT -6
|
Post by jct842 on Feb 13, 2012 11:37:24 GMT -6
Just get a chrome bolt or even a fancy license plate fastener over the hole. Amber reflector?
|
|
|
|
Post by Alleyoop on Feb 13, 2012 14:49:11 GMT -6
Excellent suggestion, You are always thinking john  Alleyoop |
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Feb 13, 2012 15:38:01 GMT -6
Kickstarters have saved me walking many many miles.. I wouldn't remove it.. it can save your butt at 2 'oclock in the morning when your battery dies...
|
|
|
|
Post by Alleyoop on Feb 13, 2012 15:42:57 GMT -6
Sprocket, What in the hell are you doing out at 2 in the morning, I thought your curfew was 12 midnight  Alleyoop |
|
Scooter Doc
Currently Offline
Posts: 1,936
Likes: 7
Joined: Jun 18, 2010 22:25:14 GMT -6
|
Post by sprocket on Feb 13, 2012 15:49:11 GMT -6
LOL..FULL MOON!
|
|
Scooter Doc
Currently Offline
2008 Roketa MC-74-150cc & 82' Honda CM 250 Custom
Posts: 491
Likes: 1
Joined: Nov 26, 2011 21:17:27 GMT -6
|
Post by bcgreatness on Feb 13, 2012 15:58:05 GMT -6
When removing the kick starter just remember to remove all of the pieces. When i removed mine,i didn't remove all of the spacers that half fit into the inner most wall of the cvt. One vibrated out of the hole and went bouncing around the inside of the cvt. Had to fix that quick lol. The point is, they didn't look like they were supposed to come out. So like i said, just make sure you get all the pieces out.
|
|
Scooter Doc
Currently Offline
Resisting Arrest is also Stupid..right JWJ :)
Posts: 629
Likes: 0
Joined: Dec 29, 2010 22:32:13 GMT -6
|
Post by Random Hero on Feb 13, 2012 17:29:04 GMT -6
I agree with sprocket..but then again i have not had one for years. I also just leave the hole open, its not that noticeable
|
|
Certified Clinician
Currently Offline
Posts: 74
Likes: 0
Joined: Feb 6, 2012 21:52:04 GMT -6
|
Post by redrider on Feb 13, 2012 18:16:23 GMT -6
I kick starter is gone maybe u can fix me up with those old parts u remove if u have a gy6.
|
|
Scooter Doc
Currently Offline
Resisting Arrest is also Stupid..right JWJ :)
Posts: 629
Likes: 0
Joined: Dec 29, 2010 22:32:13 GMT -6
|
Post by Random Hero on Feb 13, 2012 20:04:44 GMT -6
mine have been gone for about 4 yrs
|
|
Scooter Doc
Currently Offline
2008 Roketa MC-74-150cc & 82' Honda CM 250 Custom
Posts: 491
Likes: 1
Joined: Nov 26, 2011 21:17:27 GMT -6
|
Post by bcgreatness on Feb 13, 2012 20:43:05 GMT -6
I took mine offbecause the previous owner only used the kick starter. The gears are all stripped out and was un able to make it start. Left a ton of metal shavings inn the cvt.
|
|
Scooter Doc
Currently Offline
Posts: 316
Likes: 0
Joined: Feb 28, 2011 12:11:27 GMT -6
|
Post by justbuggin on Feb 14, 2012 1:15:21 GMT -6
how about putting some leds lights there
|
|
Certified Clinician
Currently Offline
Mainely Scooters!!!
Posts: 52
Likes: 0
Joined: Dec 24, 2011 23:20:26 GMT -6
|
Post by mainepeace on Feb 14, 2012 1:26:28 GMT -6
You can get some really nice chrome kick start levers that will go nicely with the CVT cover.
Greg
|
|
Senior Clinician
Currently Offline
2008 Zhenjiang Summit Hauw HY150T-5
Posts: 144
Likes: 0
Joined: Aug 31, 2011 12:02:04 GMT -6
|
Post by silverfox96 on Feb 15, 2012 8:57:56 GMT -6
Thanks everyone, for your input on this. It is greatly appreciated. I really can't see how it would be possible to wire an LED up in that position, although it probably would look pretty good. Greg and Sprocket; I do think I will heed your advice and keep the kick-start, but replace the ugly black one with a chrome one. Thanks again guys!
|
|
..BAD TO THE BONE..
