Certified Clinician
Currently Offline
Posts: 57 
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Jul 17, 2015 11:23:55 GMT -6
After I got it ready to fit over the axle and miss the inside of the bearing I found it was much too thick. looks more like it needs a shim than washer. I need to find a much thinner washer.
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Jul 16, 2015 14:33:30 GMT -6
Thank you Alleyoop. Got it out. Widened the center of the washer out. Now thinning the washer. It's a bit too thick.
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Jul 16, 2015 12:35:06 GMT -6
How do you get the damn dust cover off without destroying it.
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Jul 14, 2015 18:13:31 GMT -6
Thanks for all the info. Any idea what size washers you used? It will give me a starting point. And what type of metal should it be? I'm thinking 2 or 3 thin washers to fill the space or one fat one.
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Jul 14, 2015 13:03:59 GMT -6
Hi Guys, Been noticing a slight wobble feeling from the rear end. Just jacked it up and removed the tires. Took the castle nut off and got it down to the axle. right side fine, left side moves in and out about 1/8 inch. I'm guessing that is not good. Advice on the next step please.
Billtrek
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Apr 5, 2015 10:56:08 GMT -6
Hi, I ended up getting a uni pod filter. And used the stock tube from the carb to the air filter. works pretty good.
billtrek
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Feb 5, 2015 21:52:01 GMT -6
Because I ride it everyday. And I don't have anywhere else to put it.
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Feb 4, 2015 20:00:09 GMT -6
They're already on photo bucket. I just did something wrong when I did the link.
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Feb 4, 2015 16:01:47 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Feb 4, 2015 15:18:36 GMT -6
Hi guy's,
I need to replace the air filter on my Ice Bear Viking 150. It keeps getting wet from the snow. Do they make one with a weather resistant cover?
Thanks, billtrek
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Jan 24, 2015 9:23:15 GMT -6
Thanks guys. It was easy once I saw how.
Billtrek
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Jan 20, 2015 8:18:07 GMT -6
Where can I find a how to on adjusting the chain on an ice bear Viking trike?
Thanks, billtrek
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Oct 23, 2014 9:56:18 GMT -6
Changed the oil's with 10-40 pennzoil, and 80-90 pennzoil. Didn't change the dif grease yet since I can't find my darn grease gun. Just got back from getting the trike inspected. Passed with no problems. Now I'm all set until May. I was suprised to find my old goldwing cover fit pretty well on the trike. billtrek   |
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Oct 17, 2014 21:38:30 GMT -6
I figured out photobucket. The rear tires say 30lbs max and the front says 32lbs max.
What weight oil should i use? The book says 15-40 weight. Is that right? How about
the tranny oil? What about the dif grease should i use honda moly or something else?
I see what you mean about the air filter.
|
|
Certified Clinician
Currently Offline
Posts: 57
Likes: 0
Joined: Sept 1, 2014 9:57:26 GMT -6
|
Post by billtrek on Oct 17, 2014 15:11:15 GMT -6
|
|
I think i might cover it in the next storm.
