|
|
Post by kz1000st on Mar 9, 2022 15:20:46 GMT -6
I would wait until the scooter has more miles on it. That scooter is more than capable of higher speeds. If it still doesn't roll faster at 500+ miles then look into an intake or exhaust restriction. 150cc scooters aren't restricted, 50cc scooters are sometimes restricted to 30 mph.
|
|
|
|
Post by kz1000st on Mar 9, 2022 15:03:14 GMT -6
Depending on how long it's been together. At worst it will require some persuasion. Use something to protect the shaft so it doesn't mushroom the shaft while applying force.
|
|
|
|
Post by kz1000st on Mar 6, 2022 20:42:09 GMT -6
You don't need the VIN number. On the lower left hand side of the engine is a number. If it says 39QMB it's a 50cc. If it says 57QMJ It's a 150cc. The 39 or 57 is the bore size in millimeters.
|
|
|
|
No Spark
by: kz1000st - Feb 25, 2022 14:22:01 GMT -6
Post by kz1000st on Feb 25, 2022 14:22:01 GMT -6
Kill switch, CDI, coil, trigger on flywheel, stator..All will have to be checked one at a time.
|
|
|
|
Post by kz1000st on Feb 8, 2022 17:39:57 GMT -6
Start checking electrical connections. Possibly a plug isn't completely tight enough and shaking the scooter might just helps bring it together.
|
|
|
|
Post by kz1000st on Feb 5, 2022 18:59:53 GMT -6
I'm not proud and I believe that there are better people to answer this. www.modernvespa.comPiaggio scooters are them. |
|
|
|
Post by kz1000st on Feb 4, 2022 18:14:12 GMT -6
They're okay if you are careful. Just don't forget it's engaged when you need it unlocked.
|
|
|
|
WindScreen
by: kz1000st - Feb 4, 2022 18:11:00 GMT -6
Post by kz1000st on Feb 4, 2022 18:11:00 GMT -6
This seems to work for him.
|
|
|
|
Post by kz1000st on Feb 4, 2022 14:40:40 GMT -6
|
|
|
|
Post by kz1000st on Feb 1, 2022 14:59:31 GMT -6
If this scooter isn't that old then the dealer should be fixing it under warranty. Scootstar is a division of Alliance Powersports the importer also for Lance and SYM products. If it isn't I would be looking at the valve clearances and the carburetor. If the valve clearances have closed up you will have low or no compression. If the carburetor has gotten dirt in it then it might need to be cleaned. Possibly the choke isn't working properly. Have you sprayed starter fluid into the carburetor?
Before you do those things call the dealer. It could be a cheap and easy fix that will cost less than dumping the scooter for a loss.
|
|
|
|
BMW CE 04
by: kz1000st - Jan 26, 2022 15:34:14 GMT -6
Post by kz1000st on Jan 26, 2022 15:34:14 GMT -6
|
|
|
|
Post by kz1000st on Jan 24, 2022 16:09:09 GMT -6
|
|
|
|
Post by kz1000st on Jan 24, 2022 10:45:34 GMT -6
|
|
|
|
Post by kz1000st on Jan 24, 2022 10:41:17 GMT -6
|
|
|
|
Post by kz1000st on Jan 21, 2022 14:58:57 GMT -6
|
|
