Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on May 24, 2012 13:02:58 GMT -6
What brand of chain did you get some of that stuff is not to good.
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on May 10, 2012 15:18:00 GMT -6
COME ON I AM FALLING ASLEEP OUT HERE
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on May 1, 2012 13:40:21 GMT -6
The 15.00 tack works fairley well /But the fla sun plays hell with the digital display. You need to give it's mounting a little more consideration than I did.
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 27, 2012 13:06:36 GMT -6
Thank you
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 27, 2012 10:34:50 GMT -6
The tack seems to work ok but could some one give me the rpm range of these gy6 motors in a trike Idle____ full throttle______ I saw it but i do not remember the range or where I saw it // old age is setting in I guess//
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 26, 2012 16:11:51 GMT -6
Was the tack installed by the factory? What are the colors of the other wires? What is the black wire connected to? Any name on the Tack?
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 25, 2012 11:05:29 GMT -6
I got my 15.00 tack it works how good it is ///too soon to tell what is the average idel rpm for a gy6 150 in a trike?
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 24, 2012 15:36:22 GMT -6
I ordered the right one /I took one off a old honda generator I have out it the shed works fine .But I will replace it when I service the motor in a couple of days
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 24, 2012 11:35:00 GMT -6
You are right these machines are not up to the quality of Honda /Kaw/Yamaha/ but the price is a lot less to you get what you pay for. The parts are avaible if you know how to find them//and if you can make the repair. From what I have seen our local support in this area is crap. I had to order a spark plug cap how bad is that. I ran a Honda/ Kaw dealer ships service dept in Miami for 12 years if I could not supply a plug cap they would have linched me.
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 23, 2012 19:17:50 GMT -6
Why do you believe the shop went out of bussiness? My guess was internet sales of the units/
all though most of the scooter shops I have checked out in this area //dont stock parts and do not repair much//FIDO
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 23, 2012 19:05:18 GMT -6
I believe that the scooter industry will have these kind of problems untill they set up a system of dealers to PDI the bikes /deliver/ and make sure they are right BEFORE they are deliverd. Also I think they should reconsider there mail order delivery system. Its no wonder they have so much trouble with the machines .Oh well thats my two sence for what it's worth//
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 23, 2012 14:29:58 GMT -6
I found a used ps150 11 they are out there you just need to look.You have to go through them any how and correct the problems . So I desided to start with a used one It had 600 klm on it set up for couple years no major problems yet .Cosmetic mostly but if your not handy with tools don't try it. I got it for a good price so I can put a little in to it with out crying. Good luck
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 19, 2012 18:14:17 GMT -6
Ok thanks for the come back the info I have gotten is 8 bolts to 10 /where did you find the strips for the running boards. Did you make them? I would like to do the rear box idea but not haveing much luck with the rack
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 19, 2012 14:08:21 GMT -6
This may be dum but what is the diff in demenistions of the long case and the short case gy6 150 engine engine number is 157QMJ just need a new gasket
|
|
Clinician
Currently Offline
Posts: 35
Likes: 0
Joined: Apr 11, 2012 19:37:21 GMT -6
|
Post by fido64 on Apr 18, 2012 10:36:47 GMT -6
I think you are right but for 15.00 I think it is worth a try
|
|
