Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 14:39:08 GMT -6
#1 goes into the head #3 and #1 are the same hose the vacuum line goes from the metal piece on #3 to the manifold and #5 is hooked to #3 with tubing its on the other side of the scoot #4 is my petcock
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 14:03:50 GMT -6
ok i want to remove all that epa tubing and block off the head but wasn't sure it would run if i did, i removed the tubing from my vip but it didn't have the metal valve just the canister this scoot has both
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 13:57:20 GMT -6
the metal piece is connected to the canister and the canister vents to nothing the air hose that goes to manifold is connected to the metal square piece
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 13:35:02 GMT -6
then then that piece is hooked to this Attachments:
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 13:34:24 GMT -6
hose is hooked to this and then to the manifold Attachments:
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 13:01:28 GMT -6
heres a pic Attachments:
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 12:46:02 GMT -6
I unplugged it and stuck a bolt in
the hose to block it and it wont start, plug it back in to the manifold it starts is why i thought it may be hooked to the exhaust
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 12:37:55 GMT -6
its plugged into the manifold if i unhook it, it wont start or dies when i unplug it
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 11:30:39 GMT -6
it has this one you posted but it wont run without it hooked up Attachments:
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 20, 2013 8:15:23 GMT -6
I picked up a roketa bahama for 250 bucks it runs decent but the hose from the egr sometimes falls off and it dies and will not run without it, i want to remove it and run one hose to the manifold and do away with this. It has two hoses a plastic canister like my vip had and another hose with a metal square box it won't run without the box hooked up, i want to take both pieces off and block off the head. Does the square box and the exhaust pipe work together and can i remove this without getting a new exhaust pipe
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 17, 2013 10:37:14 GMT -6
I go on both forums but any problem i may have i post it here, much more knowledge on this forum
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 17, 2013 10:34:40 GMT -6
My daughter is about that same age no way would i let her ride with me on my scooter maybe if she was at least 12
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 16, 2013 16:23:37 GMT -6
took the carb off again opened it up and realized the pin that holds the floats was pushed out pushed it back in and switched the hoses as you recommended and it runs as normal all fixed, i can bounce it all i want and not a studder
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 15, 2013 20:35:54 GMT -6
oh i see i'll switch them
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Jan 15, 2013 20:11:55 GMT -6
its angled down i ordered a new manifold and spacer the straight shot is going to the petcock
|
|
