Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 17, 2014 19:59:26 GMT -6
I plan on scuffing my pads with a dremel sanding drum. I notice that only parts of each pad seem smooth which tells me that the surfCe isn't true. Maybe sanding down those smooth areas which are high spots will help grab better?
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 17, 2014 19:31:39 GMT -6
Ally I set mine at .003 this time rather than 002 like I usually do. Is much louder. Hope it's mechanically ok to do it that way. I run full synthetic and notice that just using that oil makes the mechanicals louder. I guess its thinner
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 17, 2014 18:13:21 GMT -6
Everybody has em.
One thinbg Ive noticed is that the noise from valves at .003 is much more pronounced than at .002 but runs better.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 16, 2014 18:16:52 GMT -6
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 15, 2014 21:18:32 GMT -6
Snug
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 14, 2014 17:42:18 GMT -6
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 14, 2014 15:33:04 GMT -6
Bike been runing fine but decided to check the valves anyway and I found the exhaust was closed up where a .002 wouldnt slide in. Set it to .003 and what a difference ! Been 1000 miles or so since the last adjustment and a gradual reduction can probably go by without much notice. The intake was still spot on at .003 but that small change can make a huge difference in performance.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 14, 2014 13:28:00 GMT -6
Your statement is very confusing. Anyway its never a good idea to run any engine without a filter. Secondly if it runs fine without any filter then it had to have been way too rich before and should have run like crap then.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 13, 2014 21:08:30 GMT -6
no bluing. Ill look at that system a little better tomorrow to see where it goes when i do a valve check.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 13, 2014 20:46:49 GMT -6
Just PAIR system off the valve cover. Not sure if thats vacuum controlled. Theres no valve on the big tube.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 13, 2014 20:44:49 GMT -6
I actually did....sort of. 2013, Insurance settlement for getting hit my a Durrango 40k, Back wages collected by the wage and hour division 5k...2014 looking good as well, 50k workers comp settlement looming for partial rotator cuff tear.
Buying more Chinese scoots...priceless!
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Whats this?
by: twowheeler - Feb 13, 2014 19:40:17 GMT -6
Post by twowheeler on Feb 13, 2014 19:40:17 GMT -6
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 13, 2014 19:35:12 GMT -6
Gotta be electrical at this point. Coil? CDI?
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 13, 2014 19:09:14 GMT -6
I like this Bintelli a lot! Looks alot loke my BMS but has subtle differences that i like including color. Destin Fla will ship for 100 bucks and its the same price as the BMS I have now  |
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Feb 13, 2014 19:02:07 GMT -6
Most of the 50s ive seen have some sort of use for vacuum lines. Since i have changed over to a gravity fed fuel delivery I have only one vacuum port on my intake and its plugged off. What if anything else is using vacuum to operate? Carb slide maybe?
|
|
