Doc's Anything Goes
Currently Offline
Posts: 352 
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 25, 2014 19:09:47 GMT -6
Sorry I'm still a newbie and get excited sometimes.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 25, 2014 17:32:32 GMT -6
Not trying to steal his post but my solenoid is going out too and makes a weird sound before it turns over the starter. Did the screw driver test with the key in the ignition turned to on and put the screw driver over both ends and it turned the starter.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 25, 2014 9:56:01 GMT -6
No like this  |
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 21, 2014 9:32:19 GMT -6
Looks like a good bike, 151cc and it has an oil cooler if, I'm reading this parts book correctly. www.cobrasales.com/parts/tgb/TGB%20R9%20Parts%20Book.htm Looks like they have a new name and I don't know why www.peirspeed.com/ ahhh here's why, 2008, Cobra Powersports enters a supply agreement with TGB to manufacturer Peirspeed scooters for the U.S. market and ends its TGB distribution agreement. Peirspeed becomes the exclusive distributor of the Sachs MadAss motorcycle.2010 Cobra Scooters, LLC changes D/B/A to Peirspeed. Peirspeed enters exclusive manufacturing agreement with Gematic. |
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 19, 2014 21:32:01 GMT -6
I uh tried the wd 40 and nothing happen. Just going to replace the brake light plug 5 $ should be an easy fix. The plastic is however very,very delicate.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 19, 2014 12:54:18 GMT -6
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 19, 2014 11:58:01 GMT -6
I rode out in the rain for a couple days and noticed my front brake light was working but a few days later it worked only when I pressed down hard on it and a couple of minutes ago it worked but now it has stopped completely. The back drum brake works and I inspected the two plug ins for the front brake and they were wet if that helps. Here's some pictures of my wires in the back. 1drv.ms/1wL38RK |
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 21:58:55 GMT -6
Tell me about it. Stuff eats up the edges of the paint by the master cylinder
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 21:52:16 GMT -6
Congrats.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 21:15:25 GMT -6
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 20:23:36 GMT -6
If its an auto trickle that stops is it okay?
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 15:33:48 GMT -6
Is that a real picture of a guitar case on a Harley? If I'm not correct please correct me.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 15:11:25 GMT -6
Rain here and my helmet fogged up so I now spray a defogger just to be safe.
|
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 15:01:33 GMT -6
If this seal breaks on the master cylinder will it cause it to do anything bad? The question is should I replace this? 1drv.ms/13z98lF there is a picutre of what i'm talking about. |
|
Doc's Anything Goes
Currently Offline
Posts: 352
Likes: 15
Joined: Mar 30, 2014 10:01:25 GMT -6
|
Post by adamhoyer on Dec 17, 2014 14:57:05 GMT -6
I disconnect my red then black wire and try not to touch the terminals I think they have a little lead on them, I then hook up my charger then plug it in and it auto stops the trickle like the one you bought. I leave the battery inside the scooter still and don't have to move it. Not too sure on if you should use a 3-amp charger all the time but I'm not an mechanic really or electrician so I think you might be okay.
|
|
