Auto enicher qustion: By richardthescooter2 (Read 3,344 times)

[richardthescooter2]

I know my enricher isn't working probably, could this give you rough idle? (like its missing)

[mike6736]

Yes it will or can affect the idle. You can get a new one cheap they are at a local shop or ATV shop

Magoo

[richardthescooter2]

thanks mike6736, I'm going to trace the wires back and make sure I'm getting contact, many times the enricher is some what warm, but never hot.

[Alleyoop]

Yep, if it does not extend out all the way or doesn't extend out to cut off the extra fuel it will run rich.
Alleyoop

[richardthescooter2]

Thanks Alleyoop, Just had some rough idle and seem rough taking off, like the roller weights were out place, just put those bearings in, might be too tight, so today took nut off again and redid it again making sure its not to tight, and check out my cvt, it seemed good.

[tvnacman]

Rich I have the enrichner.

John

[richardthescooter2]

Here is pic of enricher I need.

[richardthescooter2]

Here is pic of my enricher

[richardthescooter2]

Now last night when my scoot engine was cold, I pulled my enricher, placed my thumb in the whole and started my scoot, after a short time my enricher did extend, so it is working, so when I put it back together, I made sure the needle in right position. It does seem to start better, we will see.

[richardthescooter2]

Today was going to take scoot to work (and its back to its old tricks) hard to start and battery crankking down. I did notice the enrich doesn't fit tight, it seems loose, would that play a part of hard starting, or it might be that stupid intake again, will check it out tonight.

[tvnacman]

Rich I will be making another large order, the intake I showed you I can see if I can drill another port into it interested? If you are If I feel it will work will you take it from me ?

John

[richardthescooter2]

Here is pic of my intsake, I'll have too look back and see the pic and see if that will work, I'll let you know. the base has to look like this to work. TV, show me pic.

[richardthescooter2]

Found this one with one port, not sure if the base is the same

[richardthescooter2]

This is the one alley showed me (one port).

[tvnacman]

How mm are the bolt holes apart ?

John