Recent Posts  By   (Read times)

are the belts too tight, do they slip over the drive boss without any problem or are they tighter than glove tight? might be a chinese lemon bike problem. if your buying and i dont hyink you probably are the wrong belt... maybe

20 degrees 9 am gogni to work. one morning, i decided to wear a half helmet. my ears burned until i went to sleep. i was worried, i woke up the next morning and they defrosted, i was ok.

i found a big leather jacket, and long johns, keep you warm, and a full faced helmet, and a full rain set coat gear, jacket and pants will knock all the wind off you. and nice leather gloves.

heres what i read on another site.
anything that will raise temperatures in the cylinder will help promote detonation

hence my reason for saying that taking the gasket off will detonate. rich conditions, which isnt from taking the gasket off and thats what we where discussing, will lead to an air leak and detonations, rich conditions arent from lean conditions and they happen when fire comes out of the < made up by me > it happens, of the exhaust port as the exhaust gasses are being, expelled out fo the port or valve, and reignite leftover exhaust build up gasses in the muffler.
.. and where talking about a backfire and not all that stuff.

if somenoe couldnt describe it, noone could of made it to begin with.
the thing your readme, fails to mention, is how lean leads to backfire.

and the thing im confused about in your readme is that, what do you mean by backfire? did you say it backfires when the exhaust valve gets blown? sure i bet a lot of fire gets shot out when that happens.

if its a 4stroke, my best upgrade, was a uni filter and a 90 main jet. and, lighter rollers. but not rollers, sliders. 5 grams. if this is a 4 stroke chinese. and i knocked, on mine, the bung plug that comes out the end on the exhuast, off. it openned the hole up a little bit, and i noticed a little bit more power. this was a 08.

make sure if you pull angled ones through, that they dont go around, and hit stuff. point them out. out in a direction either left or right that they dont bang into stuff as they spin around. and buy something besides chinese valve stems to replace chinese valve stems with. if you can find something.

thats when u stick ur middle finger up to them