Recent Posts  By   (Read times)

do a complete pdi on the bike and it will last a long time

ok i understand you are wanting to be def. just be real about what you want out of the 50cc scooter and that will be a big start the torque leeve you are asking about will change the reation to the power curve of the motor it will not give any more speed but will help in the way the power is put to the pavement if you live in an area that is mostly flat then you can change the rollers and torque spring to get of the line slower but will give just a little more top end or you can get more take off and lose a little top end like all motors the more air and feul goes in the more you need more you have to get out the better you get the balance of what goes in and out the better your performance will be

monster GY6 has the stuff

i just painted my bike with Dupli-Color spray cans i had some places that had tho be sanded down to bare plastic so i used some primer on those and many light coats of paint later here is the result

the spray cleaners are for cleaning the outside of the carb if you want the insides good and clean you need to soak it for a long time

withn the 11 pole stator you will need a 7 wire r/r and do some wiring modifing i have done the 11 pole upgrade to my scooter and here is a wiring diagram i made up of how it is wired

i seen where you can get the side half of the engine case with many of the dealers on here