|
|
Switches.
by: olivertwisted - Feb 22, 2016 18:41:28 GMT -6
Post by olivertwisted on Feb 22, 2016 18:41:28 GMT -6
I'm hoping for that. My neighbor doesn't remember. I've left off the access panels and have the bike outside now to start her up so, we'll soon know. I need to go over some checks, oil, plug, etc; first. I hope I done good and have no major hitches!
|
|
|
|
Post by olivertwisted on Feb 22, 2016 18:13:48 GMT -6
Absolutely!  |
|
|
|
Post by olivertwisted on Feb 22, 2016 17:44:35 GMT -6
I toiled with using silicon on the inside lip, it slipped too much to secure anything around the outside lip. I tried using steel wire alone, around the outside lip, they would pop off. Zip ties around the lip after getting the cups around the hard lip of the molded plastic worked . Around here, salty moisture is our worst enemy. That fact is well understood by those whom saw my scoot when I first obtained it !  |
|
|
|
Switches.
by: olivertwisted - Feb 22, 2016 16:19:12 GMT -6
Post by olivertwisted on Feb 22, 2016 16:19:12 GMT -6
Thanks Alleyoop ! It does have a low/high switch but I'm unsure if, it is wired so the lights are overall off if the bike is. This type  I'm trying to save disassembly later, over one switch but, don't have a good grasp of electrical. |
|
|
|
Switches.
by: olivertwisted - Feb 22, 2016 15:52:38 GMT -6
Post by olivertwisted on Feb 22, 2016 15:52:38 GMT -6
Most simply put, are the lights wired only to light while the bike is running?
|
|
|
|
Post by olivertwisted on Feb 22, 2016 15:49:44 GMT -6
Thanks cyborg ! It's taken 4 months but, just in time for spring! |
|
|
|
Post by olivertwisted on Feb 22, 2016 15:13:39 GMT -6
Hooray!!!!
|
|
|
|
Post by olivertwisted on Feb 22, 2016 5:45:08 GMT -6
Sorry, you're having troubles @ jomama0687 . After all that you've checked already, I'd for sure be checking for fuel delivery problems too. I've had vehicles behave that way when a particle frees up from the tank and plays "peek-a-boo in the fuel line . I hope so, easy fixes are great.
|
|
|
|
Post by olivertwisted on Feb 22, 2016 5:32:47 GMT -6
|
|
|
|
Post by olivertwisted on Feb 22, 2016 3:41:47 GMT -6
Why, thank you, kind sir! richardv There's no way that I would have gotten this far without all of the help that I've had in this forum. I've been stuck so many times, lol! Willingness, that's the fuel |
|
|
|
Post by olivertwisted on Feb 21, 2016 23:33:27 GMT -6
You're welcome You may earn a new nickname from your neighbors soon, lol! All the years that I worked on my cars earned me "Nurse Rachet" ! I don't know how much of a nurse I began at but, I sure know that we save a ton of moolah along the way. There you go, catch the rascals next time! I'm glad the clutch smoothed out. You must be ridin' saweet now!  |
|
|
|
Post by olivertwisted on Feb 21, 2016 22:39:04 GMT -6
Don't know if its my connection or, the site going wonky. But, you can keep the double post as a spare since, I can't see how to delete it  |
|
|
|
Post by olivertwisted on Feb 21, 2016 22:35:51 GMT -6
Good for you, rosiemoto ! You've been "going to town" upgrading your scoot lately! The thread on adjusting your RPMs was extensive and I've been "Nose deep" in my scoot so, I couldn't really follow it but, congrats on all of the experience you've gained! |
|
|
|
Post by olivertwisted on Feb 21, 2016 22:34:19 GMT -6
Good for you, rosiemoto ! You've been "going to town" upgrading your scoot lately! The thread on adjusting your RPMs was extensive and I've been "Nose deep" in my scoot so, I couldn't really follow it but, congrats on all of the experience you've gained! |
|
|
|
Switches.
by: olivertwisted - Feb 21, 2016 21:48:12 GMT -6
Post by olivertwisted on Feb 21, 2016 21:48:12 GMT -6
I just noticed that the 2 position big switch is discolored to yellow but was originally RED so, I activated it, thinking it was probably a hazard light switch. It is. But only works on the left side of the lights.
|
|
But it's turned out great . Here's my latest pics 