Recent Posts  By   (Read times)

I tried to get mine lose with a air compressed impact gun no luck at all!!! I thought maybe the gun was junk cause it was old or maybe our Sears Roebuck compressor was out of date since they are all now Craftsman name brands not been labled sears for a long time lol! but maybe ill try heating the bolt up to weaken the Locktite I didnt think of that. But our air compressor will only pump up to 60lbs outlet pressure dont think my Dad has done any maintaince to it since he got it!

thanks to all! I think I have figured out the air pressure I want to use Allyoop and several others have suggested to run 10-15% less then the max rating so 10% less then 36 was 32.4 which the manual suggested and 15% less is 30.6psi I ran 30psi in her and felt better going around curves then 32psi did so even though the front tire has a max rating of 36psi too if I go by the plate where its telling me max 32 front and 36 rear I get 28.8psi-27.2psi and I have been running it at 28psi and its wore fine. It most of been running 34psi in rear that wore center down fast. Hope it will last this riding season then get them replaced this fall with some nicer brand named tires! So for now going to run 28psi front and 30psi rear! Thanks for everyones help!

just seems like it shouldnt be worn that fast its less then a year old! I bought brand new memorial day last summer. The odometer reads 2,800 not sure if thats 2 thousand and 800 miles or KM, but everyone I have talked to has said it shouldnt have worn that soon. I have only done two oil changes besides the break in period 300mile change, so 3,000miles all im going to get out of that tire? My 150 had originals on it with 7,800 miles and my front one still looks fine like brand new still!

???I am confused my manual is for a Fashion Sport but I have the Jonway YY250T-2 or known as Roketa Bali 250. In the manual it states 28psi in the front and 32psi in the rear, so thats what I have been riding them at so far have about 2800k on them, not sure if my odometer reads in km or miles but its at 2800. But my buddy pointed out my rear tire was looking bald, so I researched some more and found out I have the 120/70/12 front and 120/90/10 rear. Not the 110/90/12 and 110/90/10 it states for both tires in the manual. I dont think I have the correct manual? Then I read on the V.I.N Badge it says the correct size tires and says 32psi front 36psi rear, but both the front and the rear tire has a 36psi cold max psi rating, there the stock Cheng Shin tires. My dad said if thats what the scoot says go by it instead of manual, but was worried about putting the max psi in the rear. The front tire still looks good running it at 30psi but the back well heres some pics see what u guys think any advice will be greatly appreciated as I would like to prolong the life of the tire as long as possible. Thanks Bob

Back Tire




V.I.N states 32psi front 36psi rear but 36psi is max psi rating

need pics my speedometer cable just screws in on right side under the brakes?

I can hear mine good at 55mph if I have my visor open which I usually do since my windshield blocks everything since im so short! lol but with visor closed cant really hear it good but still can. its good in town or cruising slow. I have been thinking of a mod to do, in the first place on my scoot the speakers are angled to ur feet. If I cup my hand around the speaker it directs the sound upwards where I can here it better thinking of making a black plastic mould to work same way and glue it on? also maybe run another speaker like a 5 and 1/4 in my trunk and cut a hole out of the lid to mount it with the wire ran up through a little hole in the bottom of trunk to give sound coming from behind me too?