|
|
Post by crwford on Aug 24, 2016 10:40:48 GMT -6
first run 12 volts to fan and see if it works if so go to sender and ground
|
|
|
|
Post by crwford on Aug 16, 2016 18:47:05 GMT -6
If chain was that tight who PDI it that's who fault that is ? No buddy's else s
|
|
|
|
Gas in Oil
by: crwford - Jul 31, 2016 18:15:56 GMT -6
Post by crwford on Jul 31, 2016 18:15:56 GMT -6
check crank case vent see if it clogged some time the valve in line is jammed shut.
|
|
|
|
Post by crwford on Jul 31, 2016 18:12:56 GMT -6
You sound like the vent tube is closed up or off the gear box vent. Or it's over filled.
|
|
|
|
Post by crwford on Jul 31, 2016 18:10:34 GMT -6
Yes I have 3 Zodiac's as far a parts why don't you get Jim of Rapid Repair. He is my parts man he is listed above. You need to call him if you get a recording leave message he always called me. Could you take a picture of leak I maybe able to help.
|
|
|
|
Post by crwford on Jul 30, 2016 20:56:18 GMT -6
Look at axles ends you will see a dust cover pull it off you will see a snap ring. Get snap ring released and pull out axle but you may need a slide hammer mine came out easy. you my need to do both side to get your sprocket
|
|
|
|
Post by crwford on Jul 29, 2016 5:59:59 GMT -6
Think remember the saying pay me now or pay me later? If book says hi test use it or you my pay later ? It's you engine so do what you want remember the manufacturer design it one way to run the best and last.
|
|
|
|
Post by crwford on Jul 28, 2016 20:35:53 GMT -6
Ice Bear uses rubber intakes I would pull carburetor then the intake look at it really good they are noted to crack at lot causing a good vacuum leak
|
|
|
|
Post by crwford on Jul 28, 2016 5:43:24 GMT -6
Is bobcat going to replace your parts like fender and exhaust, you have a 6 month warranty if dealer PDI it.
|
|
|
|
Post by crwford on Jul 24, 2016 20:51:09 GMT -6
First who PDI it? which side fender fell off if side where harness is check it out real well. Are you sure there aren't any wires hitting exhaust system? If crack is were if you have another pipe added to make it look like double exhaust system fake anyway call bobcats just tell them were crack is but they will tell you to take a picture and sent it to them.
|
|
|
|
Post by crwford on Jul 23, 2016 11:32:43 GMT -6
No your float seems to be stuck take float bowl off and find out if needle valve came off or float getting fuel inside it if so replace float.
|
|
|
|
Post by crwford on Jul 20, 2016 20:24:29 GMT -6
Are you sure if you have a vacuum shut off is working it really sounds like it's bleeding back to carburetor floods engine at high speed.
|
|
|
|
Post by crwford on Jul 19, 2016 11:19:29 GMT -6
I see more Victories than Indians, especially their flagship bike, with the roll down windshield
Maybe because the Victorys have been out a lot longer then the revamped Indians new company. As far has quality they so far got there act together really a nice looking bike that I saw.
|
|
|
|
Post by crwford on Jul 19, 2016 11:12:57 GMT -6
I need to ask how old is bike and miles on this belt
|
|
|
|
Post by crwford on Jul 19, 2016 11:11:47 GMT -6
My question is are you sure it's not parts made into belt how about some pictures. Or take off the cvt cover and see if anything shows signs of rubbing scuffing of some sort.
|
|
