Certified Clinician
Currently Offline
Posts: 83
Likes: 0
Joined: Feb 24, 2012 2:19:27 GMT -6
|
Post by tydow on May 12, 2012 11:33:24 GMT -6
Hello Everyone, I just got a new 150cc Edge. It has about 29 miles on it. The scooter takes off fine with a very decent pickup but it will not go past 30-35 miles per hour. It seems like it tires to go faster at lower speeds if that makes any sense. When I got the scooter and started the PDI I noticed the big hose that connects to the air filter was lose. We attached that back together and I thought that would solve the problem. Well it kinda did for a day so I thought. When I first got the scooter I put regular gas in by mistake instead of the premium. I hope that did not mess anything up. Also my exhaust pipe sounds more hollow than my other scooter. I was told that was normal for this model? I was told that maybe I should change the spark plug to a NGK, but it came with an upgraded NGK anyway. I also adjusted the idle screw. Do you guys have any suggestions? I looked though some of the troubleshooting boards but just having trouble as to where to start looking first. Thanks KEV Attachments:
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 0
Joined: Feb 24, 2012 2:19:27 GMT -6
|
Post by tydow on May 10, 2012 6:39:56 GMT -6
thanks for the help guys!
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 0
Joined: Feb 24, 2012 2:19:27 GMT -6
|
Post by tydow on May 8, 2012 19:58:34 GMT -6
Hello Everyone,
Quick question. I change the motor oil in my Tao Tao 2011 5occ scooter. I did not notice until I finished up the oil change that I used a non detergent 30w motor oil. It may be all in my mind but it seems like my scooter now has trouble wanting to stay running. I put about 4 miles on it since the oil change. Should I drain it an put an oil in it with a detergent in it or is it ok? My scooter does stay running after a few minutes.
Thanks so much. Kev
|
|