Certified Clinician
Currently Offline
Posts: 83 
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 27, 2014 20:13:59 GMT -6
that's what I mean, they charge me for fuel so pretty much they will empty my pockets because they drive a 2007 dodge ram 2500 and diesel prices! oh gosh@  so well someday someone will find one near me and will not charge for parts xD |
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 27, 2014 19:50:50 GMT -6
I have family over in bay city michigan which is near mount pleasant however they like to charge me for fuel if they do a favor for me  I thought you meant that this graveyard was like an open field that have dead scooters |
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 27, 2014 19:36:36 GMT -6
are you charged money for every part you take? or can you just come here and take anything you want free of charge? dumb question if no charge made then maybe I can send someone overthere to bring me an entire engine to rebouild for the fun of it just would need location :S |
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 21, 2014 16:16:06 GMT -6
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 21, 2014 16:14:43 GMT -6
well on mine I have kill switch for key switch and kill switch and my engine kill switch stoped working and wouldn't turn off engine, turned out to be a loose wire in the connections from killswitch to harness. If I remember correctly you can find a diagram for the wires in the killswitch in this forum
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 21, 2014 14:04:57 GMT -6
about 60 mph max now I need to lose body weight to get a little more speed :S
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 21, 2014 9:05:45 GMT -6
I fixed this a while ago, my clutch plates went bad and I had to much weight in my backpack which caused me to lose speed I always carry many tools and my school work in my backpack :S I carry tools because this motorcycle left me stranded once and I didn't have any tools so I always carry them around with me and 3 heavy books |
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 15, 2014 5:09:46 GMT -6
try them out might look good  I installed mine using a battery relay going to ballast and bulbs then connected power wires to switch and voila! it works hoever my switch doesn't work for high beams :S if for some reason your HIDs fail I can tell you a great seller that sells good HIDs and quick to install cheap too he also includes 1 year replacements. I didnt have to replace any bulbs because im running a 12 pole stator and a 12V 10Ah also for some reason my HIDs can run on DC and AC O.o originally they run on AC I think |
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 10, 2014 1:36:49 GMT -6
NO Racer!!! NO! Don't do it buddy! That "ABS" is junk. If it is causing your problem, then it's best to remove it all together, not replace it. It's not ABS; it just dumps your braking force if you grab a big handful of the front brake. It's dangerous. As soon as I get things settled in on my scoot, that ABS thing is GONE No I mean that currently I have no ABS and my back brake locks the wheel as soon as I slightly press it which annoys me because it has nearly made me crash about 13 times im so used to pressing back brake and slightly using front but as soon as I press back brake my wheel locks up and my motorcycle screeches all over |
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 9, 2014 21:20:44 GMT -6
I have the same problem my Back brake locks the wheel as soon as i press the brake which I assume my back brake is in very good condition however my front brake feels squishy even tough I bled the system same date I did my back brakes, so I will have to buy an ABS upgrade which cost abut 12 bucks
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 7, 2014 18:01:01 GMT -6
well is there a way to bypass the switch and add a separate switch for high and low? I have 2 switches 1 for turning on or off my headlights completely and one for highbeam and low beam. If I connect the blue/red cable that comes from the on/off switch for headlights to the blue high beam wire would that work?
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 6, 2014 19:43:32 GMT -6
never mind i mixed the colors i have light blue and dark blue so yes if dark blue is high beam I should folow that wire again and check switch right
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 6, 2014 19:03:02 GMT -6
the blue wire goes to headlight and to turn signal in mine so only left is the white wire. I should check white wire and also check contacts on switch right
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 6, 2014 17:57:55 GMT -6
well my high beams don't work only low beams I checked all wires and they look good,but when i turn on high beams my low beam turns off and high beam wont kickin and high beam indicator wont even turn on either. can it be a bad switch?
|
|
Certified Clinician
Currently Offline
Posts: 83
Likes: 1
Joined: Jan 30, 2014 1:02:54 GMT -6
|
Post by racerx125 on Apr 6, 2014 13:01:49 GMT -6
Well Did the install and look how it looks! for $43 USD Includes 2 bulbs 2 ballast and a relay cable for battery color 6000k  |
|
so well someday someone will find one near me and will not charge for parts xD
I thought you meant that this graveyard was like an open field that have dead scooters 
I installed mine using a battery relay going to ballast and bulbs then connected power wires to switch and voila! it works hoever my switch doesn't work for high beams :S if for some reason your HIDs fail I can tell you a great seller that sells good HIDs and quick to install cheap too he also includes 1 year replacements. I didnt have to replace any bulbs because im running a 12 pole stator and a 12V 10Ah also for some reason my HIDs can run on DC and AC O.o originally they run on AC I think