Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 26, 2012 22:25:31 GMT -6
i ordered a scrappys 52mm big bore kit gonna use an extra base gasket hopefully my timing chain will fit since its already tight after the hoca performance 50mm head will get a new stroker crank if it breaks my crank whats my chances of it lasting 3000 miles thats what id like to happen but if not ill get the stroker sooner or should i just change it now gonna do my gears tomorrow and get it tuned before i install the kit one thing at a time
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 26, 2012 16:43:21 GMT -6
ok ill pick up the 1 ton thanks
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 26, 2012 15:55:10 GMT -6
i got my new gears in from scrappy going to install them tomorrow how hard is this gonna be any tips for banging them out and in and any tricks? may pick up a press at harbor freight would i need the 1/2 ton or 1 ton press?
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 25, 2012 22:57:08 GMT -6
alley is a scooter genius if he cant get you going no one can hang in there you'll be on the road again
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 25, 2012 22:48:40 GMT -6
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 19, 2012 22:24:10 GMT -6
alley is badazz if it can be fixed he can fix it learned TONS from him he gets it done
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 19, 2012 13:43:23 GMT -6
check the airbox to see if you cracked it
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 18, 2012 8:31:36 GMT -6
I live in a hilly area dont want to lose too much accel i have 15/52 gears now what would 16/50 gear set do for me i would like to gain 4 or 5 mph without losing alot torque
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 17, 2012 16:19:01 GMT -6
ok ill leave it and get the gears great advice as always thanks
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 17, 2012 16:01:03 GMT -6
ok ill thanks ill get a 7 gram set and mix them for 6.5 gram set whew! this getting costly lol
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 17, 2012 15:46:02 GMT -6
what are the max rpms i should run it runs awesome now but dont want to grenade the motor with too high rpms
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 17, 2012 15:04:08 GMT -6
update got some six gram sliders with koso variator boom back in the powerband 8000 rpms max at wot 48 gps on flat cruise at 43 gps 3/4 throttle i think ill leave the scoot alone from here is 8000 rpms too much? bad for the motor?
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 17, 2012 11:46:13 GMT -6
mine are 15/52 they will need pressed gonna take them to a machine shop after i figure out what size to get
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 17, 2012 11:25:57 GMT -6
so get 17/49 not the hoca sets 17/41 or 18/46
|
|
Senior Clinician
Currently Offline
Posts: 207
Likes: 0
Joined: Oct 15, 2012 13:03:39 GMT -6
|
Post by millsc on Oct 17, 2012 10:37:17 GMT -6
im gonna order 7 gram sliders and run them with my stock variator the koso seems hard to dial in and i lose rpms with it
|
|
