Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 21, 2014 13:54:43 GMT -6
Looks fine to me.
What tool do you use to remove the variator nut that involves the clutch?? Ive never involved the clutch when removing the variator nut using 3 different methods.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Blinker mod
by: twowheeler - Apr 20, 2014 15:17:19 GMT -6
Post by twowheeler on Apr 20, 2014 15:17:19 GMT -6
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 20, 2014 7:15:52 GMT -6
On the cool mornings around 50 or so my scoot is a tad flat at WOT for a few minutes. I assume its because the enricher no longer richens the mix. Once it warms up it runs great.
My question is can i assume the jetting is correct if it is a bit lean at first when cold? If it wasnt then it would be too rich then once it warmed up and the temps got up as well right?
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 19, 2014 4:37:12 GMT -6
In his defense I have swapped parts to another scoot for diagnostic purposes to see if that finds the problem. You may have jumped the gun leaving with it so soon.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 19, 2014 4:31:42 GMT -6
My BMS is off by 2 mph
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 17, 2014 18:38:36 GMT -6
No just havent updated the pics
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 17, 2014 3:45:28 GMT -6
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 16, 2014 21:20:04 GMT -6
 Like this |
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 16, 2014 20:58:52 GMT -6
They have a removable plug I guess  |
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 16, 2014 19:16:23 GMT -6
How so i do it in paint?
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 14, 2014 18:41:52 GMT -6
Check the rubber diaphram under the cap. Look for tears or it might be pinched and not in its groove. It could also be jetted rich.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 14, 2014 16:27:30 GMT -6
Its a 1 cylinder motor not a gargantuan racing engine lol especially at 9 bucks a quart thats going to be short lived.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 14, 2014 13:22:31 GMT -6
30 weight dino oil. Change at 100 miles, again at 300 then step up to a 40 weight since 80 percent of the breakin will be done.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 14, 2014 9:15:36 GMT -6
Usually Im pretty good at spotting potential improvements but on yours I dont realy think the wheels will add much...looks good the way it is! Maybe a gunmetal but I woildnt go black or red.
|
|
Scooter Doc
Currently Offline
Posts: 598
Likes: 25
Joined: Nov 18, 2013 18:09:27 GMT -6
|
Post by twowheeler on Apr 14, 2014 4:42:20 GMT -6
Hmm
|
|
