Recent Posts  By   (Read times)

There is no standard. My TaoTao came with 5.5 gr and my BMS came with 5s. Convert to sliders once you weigh yours.

IMO forget about any mods other than CVT. Thats the only worthwhile mod to do. A Koso variator under 30 bucks and a set of sliders is like gold. I have tried and removed every other snake oil mod there is and kept the CVT mods.

SOmetimes theres no choice. I havent seen any half sized Dr Pully sliders.

drain, add can of seafoam and swish it around and drain again.

Obviously a softer spring will allow a quicker lifting of the diaphram and probably result in a faster rpm increase ?

I heard a rumor if you use a paper type filter and have a bad case of water in gas it's ruined?

FIlled up and the scoot started to sputter and lose power. Looked at my fuel filter and saw it was milky. Clear fuel line was okay AFTER the filter. I drained a half galon into a clear jar and there was 2 inches of clear liquid floating on a the rest that looked milky. JUst nasty looking so I drained the tank and filled up at another station and put a shot of seafoam in there. Runs fine now.

Is it the flat horizontal fork bearing nuts? If so mine come lose on my Tao too. I finally used blue thread lock the last time I tightened it. If its any other bolt or nut its a good idea to thread lock it anyway.