Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Sept 5, 2011 0:37:24 GMT -6
lust squeeze them shut some i did mine that way alley told me or someone to so i did and solved my problem
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Sept 4, 2011 18:53:05 GMT -6
alley thats what it sounds like to me as well
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Sept 4, 2011 18:51:36 GMT -6
your starter drive is not catching if its the same sound as that
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Sept 4, 2011 18:49:52 GMT -6
yes thats the ohm meter u need
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 29, 2011 18:46:32 GMT -6
like it
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 29, 2011 18:42:09 GMT -6
tree cutter mechanic steel grinder is what i do love to cut treez just lots of people doing it here
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 29, 2011 2:12:53 GMT -6
take out the seat bucket go from there
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 29, 2011 2:06:45 GMT -6
no gas should not be comming out of the carb check your valves
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 27, 2011 22:39:06 GMT -6
put a 150 engine on the 50 then your set
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 27, 2011 22:25:34 GMT -6
heat up a small screw driver bend it just a little bit at the tip fish it in once it cools pup it out if you put the screwdriver in oil to cool it helps harden it back up i bend tools all the time hope that helps also if you put it in hot it may help to pull it out of the seat let me know if it help why do you think it blew out in the first place hope your moter is alrite
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 27, 2011 22:13:21 GMT -6
try putting a lock washer behind the nut then put silacone on the threads after you tighten the nut up that should hold it
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 24, 2011 21:54:12 GMT -6
well mine linhea 250 got knocked over by a storm pretty bad but it set itself rite i guess i got lucky on that do you still have spark just bike wont start at those times?
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 19, 2011 20:16:13 GMT -6
put a uni filter on it check the sparkplug see if its running to rich for a change because its usally the othewr way around set the af screw out 2 and a half turns and go from there
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
shell gas
by: sunlproblems - Aug 18, 2011 0:23:09 GMT -6
Post by sunlproblems on Aug 18, 2011 0:23:09 GMT -6
my station also says that but it may contain doesnt mean it does ask them inside if it does
|
|
Senior Clinician
Currently Offline
Posts: 120
Likes: 0
Joined: Jun 8, 2011 17:04:56 GMT -6
|
Post by sunlproblems on Aug 16, 2011 0:15:07 GMT -6
mine if you move the cable around it would not open so i wire tied the cable to open the seat up if you grap the cable and pull on it it should open my old 150 did just by reaching up by the key slot pulling the cabble
|
|
